Victron Blue Smart IP67 Waterproof Charger
The Blue Power IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Power IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Blue Smart IP67 Charger Features:
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life-enhancing features
- Low power mode to charge smaller batteries Li-ion battery mode
Description
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP22 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Completely encapsulated:
Waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Power IP67 Charger. The casing is made of cast aluminum and the electronics are molded in resin.
Start interrupt
The models with suffix (1+Si) feature a second current limited output which is always powered as long as 180 – 265 VAC is present on the input. This output can, for example, be used to prevent starting of a vehicle before unplugging the battery charger (start interrupt function).
The highest efficiency ever!
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Adaptive 4-stage charge algorithm: bulk – absorption – float – storage
The Blue Power Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used.
Less maintenance and aging when the battery is not in use: the Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode, float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Protected against overheating
Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail.
Two LEDs for status indication
Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on
Ultra high efficiency “green” battery charger
With up to 95% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Durable, safe and silent – Low thermal stress on the electronic components. – Protection against ingress of dust, water, and chemicals. – Protection against overheating: the output current will reduce as temperature increases up to 60°C, but the charger will not fail. – The chargers are totally silent: no cooling fan or any other moving parts.
The VictronConnect app
Setup, readout and configure your Blue Smart IP22 Charger via your smartphone. You can display the status of your charger and battery and even control the functions of your charger using the VictronConnect app. On your screen, the readout of voltage and current is default available. Download your app for iOS and Android.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Model | Blue Smart IP67 Charger 12/7(1) 230V CEE 7/7, Blue Smart IP67 Charger 12/13(1) 230V CEE 7/7, Blue Smart IP67 Charger 12/17(1) 230V CEE 7/7, Blue Smart IP67 Charger 12/25(1) 230V CEE 7/7, Blue Smart IP67 Charger 12/25(1+si) 230V CEE 7/7, Blue Smart IP67 Charger 24/5(1) 230V CEE 7/7, Blue Smart IP67 Charger 24/8(1) 230V CEE 7/7, Blue Smart IP67 Charger 24/12(1) 230V CEE 7/7, Blue Smart IP67 Charger 24/12(1+si) 230V CEE 7/7 |
